Haegins Complete Wallpaper Removal System

---

I have motorokr headphones. They are working great as output devices, but the control buttons aren't doing anything. Is there a way to get the controls working? I see people talking about stuff like hardy and intrepid, etc, but i have no idea what the name is for the current version. This site also does it: Is there a way to input funny characters i. I think so, to make it easier to configure, but I don't use it myself AppDB for application compatibility ratings - Join winehq for application help - See!

I've got various different windows appications I may or may not find useful. I've checked out a django app from github. Can I turn my bit Ubuntu installation into bit without having to do a fresh installation? For some reason, I can't seem to get this to work under Ubuntu Does anyone know what the differences are in respects to getting that going again? Is Winetools the thing where I get a list of stuff, like direct x and etc?

Tw sT, what kind of error are you getting. Authentication error at GDM login, or xauth error? Otherwise you can remap it for the system in the control panels. When I run wine tools, it tells me to direct it to a file to install. Last time I used wine tools, I opened it through Terminal and I got a big list. Within the script you could probably find the right window and close it. CogitoErgoSam, that is a good suggestion.

Don't listen to him he's spouting the same gibberish crap to everyone's question. If you have been banned it is probably because you have not gone along with what is acceptable! If you're not sure what acceptable! Deal with it and either wait for someone or go elsewhere. I want to hash some files, so that I can verify that they have not changed later on.. Cogito spreading windows malware Blurpeace, its just one possible fix; I'm sure there are other ways. I don't think I have the best picture of your full setup though. Linking to that site, or even to google, as support is not helpful.

That was in response to his repeated spamming of people with questions, and after I asked him to wait for someone who knew the answer and not spam. Regardless though, I stopped even talking to him, so its a moot point. I don't care whether he's spamming or not, it doesn't allow you to be rude to anyone. I tried mv -u but that didn't really work. You can always use sudo to get elevated rights, but you need to take care. You can always use sudo to get elevated rights, but you need to take care.: Sorry, sorry, yes, I used sudo as well, but the command didn't work, it told me that the directory was already there, so I think I am supposed to use a different command for replacing a directory.

I'm alright, though, I'm only doing this to replace a directory under a game. Ignore that, it was the bad advice from pakete. I am not sure, how to do it properly, but moving the old directory out of the way perhaps dirname. OLD and then simply using cp -r should do the trick then. Cogito, yeah, it's an upgrade disc, but if I can insert my prior OS disc, it'll install fine. I'll give it a shot. Thanks very much, I'll report back later.

Blurpeace, quickest and surest bet is to probably just burn one of them to an image so you dont' need to swap at all. Blurpeace, I think I'm misunderstanding your situation. Which OS is installed on the disk right now? How many cd drives, etc. Awesome, ubuntu just installed GRUB with an incorrect video configuration. He's taken care of guys, go back to your regularly scheduled support: Cogito, I am currently running Ubuntu I have one CD drive. Because I own an upgrade disc, during installation, I must insert my prior OS disc I own a Windows 98 full install disc to continue. I cannot eject my CD drive to replace the XP disc with the 98 disc so I cannot continue with the installation.

How do I eject the drive so that I can swap the discs, Cogito? I installed with the alternate CD, cause I figured "what kind of linux distro is going to be arrogant enough to think it can tetect my video settings in the bootloader". You can burn one of the windows cd's to an image on your computer. Then, it gets mounted as if it was in a cd drive. That way, both cd's will appear to your system to be mounted. I can hear little "you can't scroll this far" if I mash arrow keys. There really isn't any.

Pakete was making that stuff up. Cogito, how would I go about converting my 98 disc into an ISO? Would anybody know why I would be unable to boot into a fresh ubuntu-server install? Besides, I attempted that and it would not unmount. How do I make ubuntu not think that it knows what kind of graphics setup I have. If that will not work, I doubt making ISOs will help. A message popped up on my boot splash screen and quickly disappeared.

The message was something like: Anybody know how to fix MPlayer errors "initializing video filters -vf and video output -vo "? Blurpeace, I think I found a link that might help: The same video works in Movie Player. Urda it runs the installation process normally or jsut is dead after installation? All the way to the point my system starts reaching Oom conditions and I just simply have to restart. How can I fix this? I did, and it said it was fine. I'm actually running it again. Memtests on both machines checked out fine too. Cogito, I just hope that it recognizes the disc.

I'll attempt this tomorrow. Blurpeace, I just found my win xp CD; I'm gonna double check the right process for makin an image. Blurpeace, if you wanna wait a few mins I'm tryin to make one now so I can give you a step-by-step. I've installed lots of ubuntu servers, but never have I seen computers act like this towards it. Really, it's fine, Cogito. Just point me out the program name and I can take it from there. It takes about 48 hours of Xorg running to for it to fill my memory and cause this.

I installed the nvidia restricted driver, and half of the times I boot into Ubuntu it gives me the low graphics mode troubleshooter window. The other half it loads the driver just fine. Blurpeace, sorry if it sounded trite; just wanted to grab your attention before ya logged off.

I have tried installing the driver from Nvidia's website, the results were exactly the same. I might start fresh again tomorrow, and check all the hardware out again. But these boxes are barely used: Urda try to remove problematic hardware like RAID cards or extra video cards.

I've installed lots of 8. No RAID on these guys and the video is onboard. The error provided by the low graphics mode prompt is "failes to initialize the nvidia graphics device". Urda well maybe something was wrong on installation process because im running USE I'm not getting that and I can't reach recovery kernel. I didn't know it was this bad! Now I'll try H Then 9 times out of 10 nothing happens. But now I do have a recovery console up. But does that give you a clue what's going on when I start from GUI or how to fix?

Urda i think the console and sheel is good You could try a different mplayer GUI. Urda recovery kernell give you a crappy grapich performance really? So the GUI is separate? Urda i mean recovery mode give you a low video performance like lag video or somthing like that? When I updated to ubuntu Anyone know how to fix this? I'm starting to build a dedicated Linux box. Is Intel or AMD more friendly to the Linux community, either in compatibility or support of the community? There are some Ubuntu derivatives that we cannot provide support for due to repository and software changes.

Please consult their websites for more information. I have no idea what board this DELL box has, I'll start my troubleshooting up in the morning again with a clea rmind. Thank you for your responses. I wasn't sure if either company had shown support or opposition to the Linux community. It sounds like they're about the same. Urda you need to find out that information to check incompatibility issues. Trash but still the device is lacking the free space it should have.

Please read the channel topic whenever you enter, as it contains important information. I'd try an fsck. Not sure what kde does with stuff like that. Could try the eject command on the disk after unmounting the partition will need sudo. Hi all, I've just set up my first ubuntu home server and tried to follow this tutorial: I seem to be having some issues when trying to access any of the test sites from my dev machine. I'm accessing the server via ssh. QuiltPants i guess apache is ready, and no firewalls right? See, the default gateway is different on the two..

Is an ubuntu desktop supposed to have sshd installed and running? Can anyone help with a problem with flash. It occured when I upgraded from 8. Also, flashplugin-nonfree is in very bad state and needs to be reinstalled. I'm not an experienced user and don't know how to do this other than with the package manager.

You can also manage packages from Synaptic if you're not comfortable with the command line. I'm trying to configure the ethernet card with a static IP address. I'm using Lucid Lynx. I try to calm but it's frustrating when you're new to something. I'm having an odd problem with my server. I'm getting overheating warnings printed to my console, but the CPU is at a reasonable temperature.

The other odd thing is that it says it's overheated and then says the temperature is normal within the same second. Also, it prints this exactly every 5 minutes. SwedeMike, its happened like 5 times in the past hour, everytime i was using a different app. Any way that I try to install flash gives me the same error. Even the package manager has a do not enter sign on the task bar with an error message.

I'm using Ubuntu on as a VirtualBox guest, and for some reason, some tabs on my GNOME Terminal don't have the cursor flashing can't see it at all , so it is very hard to know where I am on the command line. Tried to use 'reset' and 'clear' and those don't work. What else can I try? Can someone check http: I haven't been able to use flash since my upgrade from 8.

Bus Device SwedeMike, i get this right before it logs me out: Or force installing the deb? I wouldn't use the term "logging off", it indicates intention, this is rather a program crash. Maybe its firefox being bad with ram causing the flicker. That identifys the chip uniuely and can be used in websearches. I just puched a random hex value as an example. If it does its task at a reasonable speed and is faultless then its fine. Please don't haze me as I am not a total noob, but not an expert either.

I have difficulty wording my questions in a way that is not offensive to technical experts. I don't want to waste your time with unclear questions, just please try and resist being a jerk to me. Its up to the job it needs to do. How well is real-time kernel working in I'm doing audio production, and still using Hardy cuz I heard real-time kernel wasn't working. Just ask your question: Flannel, ActionParsnip no i wana a interpreter not compiler ;p.

Hello, can someone have a quick look at my graphics setup and see if this looks right? You can always choose the regular kernel and uninstall the real-time one if its bad. I am trying to view HD video files that my camecorder is recording, I want to edit them as well. I either do not have the proper codec to view them, or my lappy just doesn't have enough processing cycles to do what I want to do. I have been googling and looking on forums I have not posted anything but I have not been able to pinpoint any specific information that will get me on the right path.

I am here for advice on what I should do? Real-time kernel works fine under 8. I could upgrade then downgrade if it's not working, I suppose. I just don't want to fix what isn't broken. There are a lot of options out there I'm not a media type necessarily, but a large amount of codecs can be found bundled in the repositories.

Have you installed the restricted video codecs? The howto is here: CogitoErgoSam, I have just recently upgraded to Lucid. When I was on 9. KittyBoots, check out the link Monona posted; that package incorporates a whole bunch of different codecs. Monona, I have but I think I need another one specific to the format I am trying to view that is not included. Do I use gconf-editor to change key mappings for gnome-terminal?

Do you have "libavcodec" specifically? Some of my friends have been telling me to give up and go to Windows or Mac, but I cant bring myself to giving up on Linus. KittyBoots, right now I'm checkin "apt-cache search codec" to see if any of em match what you need. KittyBoots, a list of packages in the repository, as of the last time your system checked. I substituded Empathy for Pidgin cause Empathy was too buggy, however, whenever i use the indicator applet to change my status it disables my accounts in pidgin saying i signed in from another location.

KittyBoots, specifically "libdv4" looks like it might be helpful. I followed all instructions but I can't get the buttons to type letters in gedit. I have set up the buttons, given them assignments, and saved all profiles and key sets. Monona; I did not have it installed and I am installing it now. Also, what program are you using? I don't know so much video editing, but I hear Blender is good. Does anyone know how to access your ubuntu files while in windows? There are known Linux mounters, but my attempts to get them to work were unsuccessful.

Linux mounters as in programs in Windows mounting Linux filesystems.

I guess I just use Ubuntu to move files back and forth. Maybe someone else can develop something that helps with doing this. I don't think that windows supports ext4 Ubuntu's default filesystem. Can anyone help me with my Xpadder Xbox controller issue? I have not put presets into winff before.

It doesn't show boot options for filesystems on other hard drives? This is one and only reason a person needs to switch to ubuntu. I was told to go learn how to script, but I have gotten nowhere with that. Fireking, did you hear something?

That was my jaw dropping. I am in the process of rebuilding a fakeraid via the bios util, how can I watch this process I have not played around with this before. Whenever I come on here I usually only have a question. I never really converse much, is this the place for that? I know this is the wrong channel to ask this. I asked in amarok; no use. For some reason when using VLC on my lucid X64 install i can't click dvd menu items. I had the same problem with flash. I fixed the non-responsive clicks in flash but can't figure what the problem is with VLC.

Thanks for not being a jerk to me for not being able to find this on my own! I dimmly recall some issue like that I'm not sure but I think it was something with encryption, do you have the dvdcss library on your system? Because everyone wants to join a bbs of pedophiles. LOL, I got all excited too. I was doing something else when a msg popped up because my name was entered and thought Wow For me it was "Gotta be spam, nobody legitimately and randomly beeps me in ubuntu". He's some pedo who believes people will join his board if he spams it everywhere.

I installed aTunes on Ubuntu. But the tabs on the left side looks like this: I want to use gparted. I cant find it. I am running into a problem upgrading karmic to lucid. After reading all the package lists and stuff, I get the message that ubuntu-desktop is marked for removal but that it fortunately is on a removal blacklist. How can I see which package causes the problem that the upgrade wants to remove ubuntu-desktop? No, How are you checking that www-data doesn't exist?

Flannel and yesterday I had problem setting up virtual hosts also, e. The system engine doesnt let u change themes, though. I used to have awesome set up as window manager in gnome and now it doesn't start at all, falling back to default gnome wm. When I start Xephyr on display 0, I am able to run awesome on it. When I select it manually when loggin in into gdm, it tries to run and goes back to login screen in gdm.

Is there any way I can see why it does this? I'm trying to disable a soundcard, but when i try to remove the module it says "Fatal module in use". How do i open a folder trough terminal that uses 2 lines. For example Azureus Downloads. Yeah, if theres a space in the name of the folder. Every so often I'll be working or playing and then all of a sudden its like gnome dies or x11 whichever and i get sent back to the login screen where i have to login again and none of the programs i had open are open anymore is this a known issue?

Using tab complete in your pathswill do this automatically. You don't do that You do "sudo apache2ctl start" these days. I have a problem where the system is ignoring them. Like network manager etc.. You don't do that; you do sudo service apache2 start ;. What could be the problem? I don't know a lot about it, don't use media server here TenhiShadow, ping is to my router from my PC, not going through internet. You do it the other way, install GRUB instead of ntloader.

Any can help me? Bring on the pain ;. TenhiShadow, looks like it was badly configured QoS on my router. Well, due to malware on Windows it gets quite hard to avoid it. No, there would be people who just don't get how to do it: We're waiting to offer support to others but nobody is coming with complaints ;. It is, and know why? Anybody of billions of people who live on earth may join the development. It's funny, but even Microsoft contributed some code to Linux. He was seen with a Macbook on a presentation of some Windows version. Vai su ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese.

Quicker boot sysvinit and HAL completely gone out of boot proces is pretty big already. Hello, i've small problem. I'm using gnome on ubuntu, when i set panel to transparent, application place and place where i have clock aren. Some applets are not transparent, maybe people in gnome have a fix. Also, to get it to unfreeze I have to press a keyboard button, on the server I installed grub and ran update grub , but it doesn't detect Windows. Actually, I'm just being chatty to pass time while lucid is installing: I got 2 GHz dual core with 4G's ram, upgrade says 1 hour 40 mins still to finish installing!?!

Why is ssh daemon running? It's not enabled in rc2. I've been asking same as you and the only warning I keep getting is wireless drivers, which sadly is the norm. I'm installing on my laptop, but I got an ethernet cable nearby: Just to rule it out, have you made sure that the wireless switch isn't in the off position? I installed lucid 32 bit and when it boots it displays the splash screen and than the screen goes black. How can I acess a shell in the boot? It works fine course I use wicd, not that stupid default network manager but I'm right in the middle of installing lucid I'll know shortly ;.

Could you pastebin the output of "iwlist scan; dmesg"? I possibly heard ubuntu is going to switch to google chrome? I am not able to able to log into X and my graphic card is a intel gm. I seek to download all of NPTELs video lessons from which mirror i don't care it just has to be up to date. NPTEL uploads directly to youtube. I have pidgin 2. How to downgrade to the previous one? I mean, like what used to be back during 9. Or should we just download it from Software-Centre?

Many ISPs have local mirrors that they run that don't count toward bandwidth. It works and is usable, but I have a visual distortion at the corners of the windows decoration: Does anyone knows if this is a known bug and if there is any workarround? I'm wondering how my netbook with lucid happened to get showing the wifi connection to be very bad, while the router is just in 1 meter?

Reboot does not help. How can I reset the wifi applet known connections? It is possibly causing a problem itself, router is OK. It's just that normally it's using some generic ones I browsed the forums.. I just installed KmPlot and it hasn't shown up on the applications menu anywhere. I need a packet generator for sctp packets I tried hping, but not sure if it supports sctp But it is listed: I have a question: I have a Toshiba A laptop, and have managed to install Lucid Lynx and boot into it with changing a few boot parameters. The wireless will not work still. Anyone got any ideas?

I am VERY new to all of this. Hi, anyone any ideas on how to a panel with windows on both my monitors in a dual monitor setup? And now all i wanna ask is i am not into so many graphic just a new user tho Should i use the default appearence or Compiz? Is it possible to have separate workspaces on my 2 monitors in a dual monitor setup? I am trying to connect a gigE camera to a computer running ubuntu lucid, and I am having the following problem: Looking at 'ifconfig' output, it appears that eth1 only gets ipv4 settings inet addr, Bcast, Mask if 'ifup' is run when the camera is connected.

Does lucid not set ipv4 settings? How can I force it to do so? Where do I put that? Ok, I did so but it doesn't appear to have solved it. I'll do some checks.

Well, I finally got Lucid Lynx installed on my laptop, but now I'm having a problem getting the wifi to work properly. It seems to detect the networks and connect to mine, but the internet will not work. I have a Toshiba A I don't remember the exact model number beyond that right now. Guys, I have a problem with some popup informations bubble: I get a loob of 'power information, laptop battery is charged'. It's hard to update it without a connection to the internet. Wireless is my only resource. You think WPA would be fine? I don't want to go without security at all because I live in a congested area.

Yeah i see, I give you a piece of advice, try to simply update and upgrade your laptop by ethernet since its not getting connected by a wifi so and once you are done try to connect it again and if not change up the security or password , Linux is typical you know: I am dualbooting it with Windows 7 at the moment, so I can jump there and download a package and come back and update Lucid with a flash drive. Is there a package I can download for all the updates? Ubuntu does not control my brightness ATI mobility please help, my batteries are drained in no time.

I will try to get the ethernet to work tonight and see if that helps me get the updates. What options do I have if the updates don't worry and the password and network name changes don't work? I remember there being at once time a connection to wirelss, but I don't remember exactly what boot parameters I initiated. I might try to add extra parameters in again and see if that works. I meant to say that update it and do check it once without password on it when connected and internet is working then you should put a password on your wifi router and then put that on your Lucid under your SSID name "DO it by yourself" and see if connects and works.

It is not listed in any runlevels. Hello i got a issue with terminal before it was like 'username hotname: Hello, I have never emcripted files before and I have a directory I want to put a password on. I am sure that there are many options, but what is the optimal method? I deleted mysql with "apt-get remove mysql-server". But there still are tons of files left. How can I uninstall something? SpaceGhostC2C, yep, I have about thirty fonts I downloaded some time ago, and I don't want to go one by one pressing Install this font.

I just instelled Everything seems to work except for the touchpad which seems to be stuck at a sensitivity of about Hello, i need to use ftp trough squid. What is the good ftp-client for that? I'm trying to use FileZilla but no sulotion. A short primer on linux memory management can be found here: Ok, free -m, it shows, that mb in use i just logged in. Top doesn't show anything, that uses so many memory.

ATI's latest fglrx release 8. My laptop still doesn't resume properly. Are there known issues? I've had this problem with normal ubuntu and the netbook remix. I hit "switching from windows" at https: I never thought of that multi-gesture stuff If this is happening now, just relax and enjoy the show. Thank you very much for your help with bugzilla. It works now, and have sent a comment there. Heres the deal, isntalling Virtualbox changes the kernel which effectivly breaks the ath5k driver, I need to recompile and install ath5k, I cant figure out how to do that.

I'm using Evolution with google as the data store for my contacts and calendar. I have a partition with another O.

Is it possible to somehow set it to not be automounted? I think I'd like to try recompiling, but I need to set up pxe for when it almost certainly doesn't work: I have all the time in the world I just want to do the same: I read you don't need to flash the bios on one of the links you sent me. I already had an LVM on sda and sdc.

How can I move my LVM to md0? Note that I want the other partition to keep being automounted I had a problem kind of like this I ended up just reinstalling, I tried grub menu to select different kernel but it wouldn't boot up. I had a similar thing when I updated to Jaunty from Intrepid. I didn't know that. I think I reenabled cntrl-alt-backspace. Full screen flash works poorly on my 6 year old hp desktop running ubuntu 9.

Is there any way to check if I have ati or nvidia, because it just says "standard vga" when I looked in my system properties. It's the easiest for serious errors IHO. Please use ubuntu-offtopic for other topics. Tulaneadam21, i would be looking on the web for the specs for your computer. Ce canal est en anglais uniquement.

/srv/irclogs.ubuntu.com/2010/05/17/#ubuntu.txt

Si vous avez besoin d'aide ou voulez discuter en francais, merci de rejoindre ubuntu-fr. The above mess was caused by someone who thought it was funny they're gone now. Please ignore it completely, since discussing it and making a fuss will only make them think they've reached their "fun" goal. DasEi, in sound control panel i can still hear sound when i "Test" it. Usually, there is no single "best" application to perform a given task. It's up to you to choose, depending on your preferences, features you require, and other factors.

Do NOT take polls in the channel. If you insist on getting people's opinions, ask BestBot in ubuntu-bots. How do I get two monitors going with seperate X servers I have it set that way and it says I have to restart X but save the configuration to my X file first so I hit the save button and it says it couldnt remove old backup or something. The computer specs don't specify ati or nvidia online, but the computer comes with an ati multimedia cd, so ATI I guess but I'm not sure. X is very very very sluggish, the WM isn't drawing titlebars properly, and when i move the mouse around, i see blocks around it that don't draw right The X Window System is the part of your system that's responsible for graphical output.

The given drive don't use removable media so it's not polled anyway. Depends on the system, usually in Preferences;Keyboard Shortcuts. Ubuntu did not prompt me to install either an ati or nvidia driver upon installation, which leads me to believe the computer might have some standard vga graphics card, and not be ati or nvidia based, but i know knothing about computer hardware. I would love some guidance on upgrading my evolution to 2. Does anyone know of a PPA with the latest evolution 2. Hi, I have a question about wireless cards. I can connect on my network as the admin but not under my user name.

Is there a something I need to do? Can someone name the application to get the bar of information on the left side of this picture? In component main, is optional. How do I get the keycode Gnome for a certain key? My old xmodmap script doesn't work under Carmic becausse Apple keyboard's "Command" key has a different code now I've got a sound problem on mythbuntu 9. I'm trying to get scribblenauts running on desmume but the touch screen is just all blue or green depending on the screen. Please watch your language and topic to help keep this channel family friendly.

Windows drivers for ext2 and ext3 are available for free. I know that Ubuntu can access and write to ntfs, but I don't know how much it has improved, I haven't used it for a while. Steve have the ext3 drivers improved for Windows? I am getting no response. I haven't been able to get ex2ifs to work ever.

I've tried it 4 times on 3 different computers each. I have used NTFS for this without issue. I don't recommend FAT32 due to file size limitations. I'm not into windows now days, all my computers are filled with Linux. It seemed pretty straightforward. We can go back and forth about how awesome it is in your reality, but unless there is like some sort of commonly made error I made, it doesn't work for me.

In the past, NTFS support was a bit flaky with creating new files. Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. I'm pretty sure that vista supports fat32, because most usb sticks are fat Please don't flood, use http: I'm a newbie here in linux can somebody help me?

How to install tar. If it's lighttpd you're after, just follow the link I gave you. Correct me if Im wrong.. To increase limit one has to either upgrade to a 64bit version or update the kernel with a PAE aware kernel. Would you all agree? Why are you so opposed to it? You don't need to do anything with the. If you want to remove all! IdleOne, it's frustrating when people ask for help but don't actually pay attention to your answers: DasEi, wont let me unmount says the enclosing drive for the volume is locked.

We have to remember IRC is frustrating unto itself adding the fact that he wants to install a program and does not know how and trying to follow 4 people giving advice: You don't need to compile anything to install lighttpd. As long as you properly shut down mirc. I nominate you to help henryhenryhenry. Please follow henryhenryhenry directions and you will get the result you want: Oof, i should have mentioned that the previous info would not be logged because she JUST now set the logs on.

Doesn't have to be web based. Ben64, funny you say that becuase my xorg. Ben64, yes latest versions of Xorg don't require the same xorg. Noone is answering me in the Kubuntu channel! How do I set up a wireless connection with Kubuntu? It is not detecting the wireless network That channel is dead.

Ben64, I've finally got henry to understand apt. I'm actually looking for an easy way to implement http: Wireless documentation, including how-to guides and troubleshooting information, can be found at https: Perhaps you can build a good script fontend in bash or perl Ben64, check out my xorg. There are many ways to back your system up. I haven't programmed in about 6 years. I've sent a message to gscan2pdf, see if they want to add the exactimage library to their project. If not then I suppose I'm going to have to stop wasting time on wow and refresh my programming skills.

DasEi is there a driver that I can use just to get it to work? I have an odd question to ask. Is it possible to make a ext3 partition from a ntfs hdd? I have like GB's free on a GB hdd and want to install ubuntu in it with out having to whipe the whole drive. Is this even possible? You can resize ntfs drives. I used it go increase the size of my WinXP virtual machine just last week.

That goes for ANY filesystem resizing. No you just want to make sure you start with a good clean filesystem. I noticed with Jaunty that windows check disk is automatically called after resize operation. I want to install Ubuntu for general use on a church computer. I mean if the Church users are used to Windows If they aren't used to Ubuntu they will need support. There should be constant upgrades on Linux as well.

Which version of OO? Linux has vulnerabilities as well. They may not be as easy to expliot, but they should be patched just as much as Windows. Ben64, your right but if you want to teach them then you have to support them as well. I think that you can't force Linux on folks. WHy not demonstrate from the live cd. Trust me their great. I've installed a bunch of other program just to have windows working right.

Is there a Ubuntu 9. Maybe save as odf first then export? Every field is as it should be Sorry to hear that. X has been working very well for me for some time now. No, I just tried to export a doc using the xhtml exporter and got the same error. Ben64, that's what I figured, but how exactly would I set it correctly? I'd like to take the. Where do I start? I am saving to the same directory I just saved the.

Not a permissions problems. I think abiword is going to be able to do it. Got a backup of your. Ben64, so I need to set wireless as going to 0. Ben64, right, and that's what I have set in the addresses field. I suspect that is not a common failure as everyone I know that has upgraded firefox has not run into that. Just trying to help I think I understand your issue, you are wired to a router that you are trying to access wirelessly. I am looking at a fedora bug report that might have some clues. There are several live CDs that do not require a login.

wallpaper removalwallpaper removal fabric softenerwallpaper removal 500x500

DSL, and knoppix being two prominate ones. Are there still a lot of problems with PPTP in 9. Just keep dropping the connection myself. I was trying to get rid of the "Move Window" shortcut, as it was interfering with an app I use. I clicked it, and hit "delete", thinking that would delete it. It instead assigned Delete to it. Then I clicked it, and hit backspace, which disabled it, but my Delete key still starts the moving of the window, even though it is listed as disabled. Can someone remind me what the specific command for finding out a graphics card is?

Oh, the problem is now gone. I went in, assigned delete to it again, and then disabled again, and it is not doing it anymore. How do i get sound to stop coming out of my speakers when my headphones are plugged in? My nautilus has misbehaved.

Google Books Store Haegins Complete Wallpaper Removal System Mobi

How do I restart it without crashing gdm? For multimedia issues, this page has useful information: I really don't want to crash my GDM. MrFSL, install fglrx, but aticonfig --initial won't recognize a Screen section so we were going to rewrite a new xorg. I have worked with ATI on linux quite a bit a choose to not deal with it anymore ;. FF sucks when it comes to flash personally. I would go to Adobe and download the one from there. There IS a headphone checkbox under the switches tab, though that kills headphones and not speakers.

Im trying for the opposite. I think the bit builds of ubuntu use a bit flash plugin loaded with nspluginwrapper. I am not sure what to do in your case then. I have permission problems.. An explanation of how files and directories are organized on Ubuntu, and how they can be manipulated, can be found at https: Opera seems to run better. Is there a command line utility by which I can enable or disable services in Ubuntu. Am i missing anything? I had won that wouldn't work after 9. Try using locate libflashplayer.

I have a process that has over open files, and its limit is I can't figure out how to up the limit so that my process does crash. I don't see why it would hurt. Hi, im trying to install smokeping on my ubuntu server 8. Your account has expired; please contact your system administrator. Hello, any solution yet to the slow USB transfer rate on ubuntu 9.

Message did not receive a reply timeout by message bus ". If I try to run "gksudo services-admin" the unlock button is greyed out but changes still can't be made. I'm assuming it is one your desktop. It works fine for me. I am not sure what issue you are talking about, since it seems to work fine for me. I just set this system up 20 minutes ago, and already I'm getting spam. I was just more impressed with the speed at which the spammers noticed that the system was up and had a mail dns.

There might be some useful info on the commends on it.

I am trying to follow an example i found and it has a char s[] that is taken to an argument of strtok. Hey all, a quick question. I just set up a hardware raid, and windows sees the raid, but linux is seeing the individual drives. You can try 'more' instaead of cat to make it more readable. If you are root, try using gedit or vi or vim. Questions regarding karmic are directed there as well. He asked if karmic was the next jaunty I always get driver for vcard from amd.

I am not saying it doesn't exist, I am just saying its not universal. How do you make a link to a directory to multiple other directories from the command line? I don't know, I haven't tried it. I have a directory, and I want to create a sym link to it inside several other folders. Log Out, Shutdown, Restart, Hibernate missing from panel..

What is strange is that I can use sed to change information but as soon as i try echo something i get permission denied, is this a security feature by ubuntu? To reset the panel to defaults, type this in a! By the time you do the append, the sudo is finished so you don't have permission I have in home, I folder A, and folders with , I'm trying to make a link to folder a in each of those folders , but what you gave me just makes the link in I'm having a problem getting video on mpeg movies, i've tried installing vlc, mplayer, and installing codecs but no video, only sound The output is huge and would work better on a pastebin site.

If you buy an iphone over the phone from apple, what area code number would you usually get? I have a acer aspire one and I been using ubuntu for a bit now, lovin it, but after I received my acer back from the repair center the web cam had not worked after a fresh install of ubuntu jaunty, I can not seem to get it to run can some1 here help? Is it just this particular mpg file? I can't seem to get it to work from the cli either.. Im new to packaging and as a test tried modifying alien it worked till this point..

Im a total newbie Can anyone point me to good resources to using UBuntu for graphic design? IE, a vector program, and fonts?.. You are going to use your favorite programs no matter what desktop enviroment or WM you use. I'm heading out, but thanks for the help. I'm sure there is a solution. Fragsworth, FYI steps to disable http: Hey is there a ftp-like sever software that can run over https?

I am referring to ubuntu desktop. I am referring to ubuntu desktop pls. In component multiverse, is optional. Will the encryption apply even to anyone who uses windows on my computer or will i just be a normal directory over ther? Haven't really read up on encryptfs, but I believe the data is stored in a file which is loop mounted on a directory, so on windows you'd probably see an empty directory. I've tunneled ssh through my NAT to my ubuntu server, how can I make SSH rely not jsut on a password but also on a separate keyfile that must be on teh client machine?

I didn't turn up anythign on google Don't know if encryptfs will create directory automatically. Bareword "S30gdm" not allowed while "strict subs" in use at eval 1 line 1. How do I view what kind of file system format each of my partitions are using? This is not a file sharing channel or network. I'm looking for help with basic Java programming. Would someone here be able to help me? Or maybe just point me to the right Channel? It's actually a simple question.

I've written a class that extends JComponent and I was wondering how I could find out the size of the JFrame that uses it. Tw1x, you should be able to find in the documentation api here http: Hadi, is the correct size -- for an explanation see http: Hadi, that link i gave or a google search for "hard disk size wrong" can explain it better then I ever could.

My firefox flash plackback is very slow and choppy at full screen mode. Is there any window manager that supports a "system tray"?

Our system features these unrivalled Key benefits...

I don't want to use Gnome, but I want the system tray icons, such as those of wicd, Pidgin, Dropbox,. I want to use one as a webserver, so I need a fixed IP for it. Wazzzaaa, Boohbah, I am talking about window manager though, not an entire desktop environment. Something like icewm, fluxbox or something.. I don't want an entire DE. RPM packages are not supported the package "alien" can allow installing them, but it's quite dangerous and unsupported.

Ubuntu and Debian are closely related. Ubuntu builds on the foundations of Debian architecture and infrastructure, with a different community and release process. I got some issues i would like confirmed. The linux terminal or command-line interface is very powerful.

Hello , can someone recommend me on good tool for editing PDF documents? I have the same problem with a Logitech mouse and keyboard. I'm trying to install ubuntu desktop version but evrytime, the installation process freezes I'd lke to have ubuntu v. I can ping my room mate by ip but not by hostname. Well, I'm looking at the volume control, and it wants me to pick one of 9 mixers and I only have 2. Creative Labs SB Audigy rev In component universe, is extra.

I'm sorry to be evasive. I'm using rxvt-unicode and zsh, ubuntu 9. Last time i was using it, i might have been using open dns, but i don't remember. This entry automatically added by the Debian installer for a non-linux OS. I want to write a bash script that opens a load of gnome-terminal and runs pings to selected ips for a monitoring purpose. How can this be done? The only responsibility HAL had that I was aware of was hotplugging usb devices and making those events available over dbus Should be no difference; it's the same author upstream.

It might be worth downloading the gparted livecd and booting up with that to try and format the drive. Ewald, so does the Ubuntu logo appear with "try ubuntu", "install ubuntu", etc? I know hughsie is driving part of it. But i want to set Ubuntu as a default booting. I see many have the same problem and seen some suggestions from some time back, just wanted to know if there is a more recent officially supported resolution. Ewald, try burning the ISO livecd at the lowest speed and verify the disc.

I usually use terminal with ls -a as default: I think that this is true

• Finanzas para Mujeres (Spanish Edition)
• I...Predict
• Théâtre T04 (Littérature Française) (French Edition)
• Le Dernier Jour dun condamné (Classiques) (French Edition)
• At Last
• Stranger In Translation